Archive for the ‘appetizer board’ Tag

Yes, You Should Have A Big Heart   Leave a comment

I see it all of the time.

People see my hearts on the table. They smile. They hold one over their own heart, look to their significant other, and smile some more.

Nothing wrong with a big heart. Nothing wrong with showing your heart.

Such is the human drama I inspire when I go a-vendoring. Who wouldn’t love that?

I’m sometimes asked if these are cutting boards. Well, yes, they could be. However, I believe cutting on hearts is not something we should want to do. Surgeons, perhaps. Cooks? Not so much. I think these are serving pieces, not cutting boards. Buy one, and then you’ll get to choose who gets to cut on your heart.

This weekend, I’m going a bit far afield as I go a-vendoring. It will be my first out-of-state solo event for Mr M’s Woodshop! I’ll be at Faire on the Square in Prescott, AZ. I’m leaving Mrs M at home so she can work at her “job,” and I’m doing a holiday weekend road trip.

Pulling the trailer. Putting up the big canopy, solo. Running the booth, solo. Staying at an AirBnB, bachelor style.

Who wouldn’t love that?

 

Custom Orders   2 comments

Yes, I do custom orders!

Special engraving. Unique wood combinations. Oddball requests. You name it.

To be fair, I often turn down oddball requests for special one-time constructions. I have trouble making enough pieces just to keep up with my totally out-of-control hobby, after all. Adding ideas that take extra TLC to make it to the finish line usually doesn’t make sense.

But who said I have to make sense? Adding the occasional odd request does help me use my creativity & expand my skill set. At the right time, doing a unique project can be fun. Since that’s why I’m doing this, I try and help people with fun projects as much as I can.

And, no, I still don’t make backgammon boards. Or rolling pins. Or toaster tongs.

But, apparently, if you want a Fire Pokin’ Stick, then I’m your guy.

Just Finished: Large Serving Pieces   3 comments

It’s a good thing I like making these … Large Serving Pieces.

The name is a problem for me. When I started making these, uh, LSPs, people started calling them Surfboards because they have a curvy shape … and we’re in SoCal.

We have surfers here, you see. Deal with it.

So, these were called Surfboards for a couple of years. Then I thought that they weren’t really shaped like surfboards – especially when I started making true surfboard-shaped cutting boards, so I started calling these Cheese & Cracker Servers.

Which is true … but limiting. Some people use these to serve the entree. Or the dessert. Whatever. They work great as Cheese & Cracker Servers, of course … but that’s not all that they are. So, for now, I call them Large Serving Pieces. You can call yours whatever you want!

Making this batch of 19 LSPs put a lot of sawdust into the shop, because each edge of each piece has to go across the table saw blade at an oblique angle multiple times. There’s no saw guard to help with dust collection when I make these “open faced” cuts. Plus, the work pieces go across the saw blade, not through the blade,  which means that a whole lot of sawdust gets made to shape those elegant curves under each edge. Those curves are actually made in the shape of the saw blade as the work pieces go across the blade. These cuts are called cove cuts, and you rarely see them used these days.

Which only means I’m old school. Or something. In any event, these LSPs are individually designed, hand shaped, hand rubbed, and they are now ready for your inspection!

I must note that they are one of the rewards in my current Kickstarter campaign which is almost over. The campaign ends July 31, so you have until then to become a Backer and select the reward that you would like to receive. Yes, you can receive one of these LSPs if that’s your choice. It’s one of the most popular rewards, though, so you may have to get in line if you like one of these Large Serving Pieces!

Each piece (except for the one that’s a bit wider) is about 12″ wide x 19″ long x 1-1/4″ thick. All are finished with my standard food-ready finish: mineral oil, with a top coat or my “Board Butter,” which is locally-harvested beeswax mixed with mineral oil. All pieces have non-skid feet held on with stainless steel screws for long life.

More

My Kickstarter Campaign

The Woods In The Woodshop

Kickstarter: Coasters

Kickstarter: Trivets

Kickstarter: Cheese Boards

Kickstarter: Handled Cutting Boards

Kickstarter: Large Serving Pieces

Kickstarter: Carnivore Boards

Kickstarter: Best Cutting Boards

Cutting Boards, Coasters & Small Boards   Leave a comment

Ah, the finish line.

I tend to make boards in batches. That makes it easier to cut lumber to size, and that makes me a bit more efficient.

Which would be a good thing.

After our successful Spring Fling, I was out of 12″ x 16″ cutting boards – my most popular size! That’s just not OK, so I made a few to get ready for this weekend’s event in Camarillo.

In the process of making the Cutting Boards, I made a few Small Boards, as I call them (usually about 8″ x 12″ x 1-1/4″). One cheese board got finished (9″ x 11″ x 5/8″). And then I finished a couple of sets of coasters, as well as a quartet of 3D-carved Wine Bottle Coasters. A little variety makes the whole working in batches thing a little more fun, in my estimation. I can’t make too many of one thing, or I go crazy.

As you can see here, every cutting board is unique. That’s a goal!

And speaking of goals (again, a very smooth transition!)….

My Kickstarter campaign is now 87% funded. I’m $611 from my goal of $5,000. Please consider becoming a Backer – and getting a cool reward from me in time for holiday giving. Note the clock is ticking: the goal must be reached by July 31. Check out the options here: Handmade Cutting Boards & Wooden Serving Pieces.

New: Charcuterie Board   2 comments

You pick up ideas everywhere.

When you’re looking.

And me, I’m always on the lookout for a good cutting board. When a client told me they wanted me to refinish their favorite cutting board, I was all in.

This, then, is my homage to their favorite cutting board. It’s 9″ x 20″ x 3/4″. It’s curvy. It has softly rounded edges. It’s made from Birds Eye Maple – which is highly figured Hard Maple – and this board feels elegant in your hand.

I call it a Charcuterie Board, but it’s really a cutting board, or whatever you want it to be.

Mrs M saw the prototypes and loved them. She decided that one of them would be perfect to hold my birthday dinner’s appetizer, and I, of course, had to get some photographs during the “golden hour” on the patio. I call this board a Charcuterie Board, but it’s an Appetizer Board, too.

What, I’m going to tell the Lady what board she has to use to serve the most excellent food she makes? That’s not going to happen. And the recipe is linked at the bottom, just in case you’re in the mood for a wonderful treat.

So, I call this a Charcuterie Board. Yes, it’s a Cutting Board. Yes, it’s an Appetizer Board. Yes, it’s a Cheese Board. Yes, it’s a Bread Board.

You get to choose!

Finally, I am running a Kickstarter campaign RIGHT NOW to help me expand the workshop’s capabilities. If you are interested in backing my campaign – and getting some cool stuff as a reward – then, please, click here: Handmade Cutting Boards & Wooden Serving Pieces.

Here’s the latest to make it to the finish line from the Woodshop!

More

Velda’s Bruschetta

%d bloggers like this: